CupixWorks Support Center

Upload Reference Plans

Upload Reference Plans

TABLE OF CONTENTS

There are several steps required for setting up reference plans for a project. You can also revise the documents later.


1. Choose a reference plan upload method

Use one of the following methods to upload your reference plans to your CupixWorks Project:

  • Connect to BIM 360 and import BIM 360 plans

    • Link the CupixWorks project to your BIM360 project.
    • Upload instructions:
      1. Click on Integrations
      2. Click on Link to BIM 360 Project
      3. A pop-up window will appear asking you to log in to your Autodesk account. Enter your user information, then click on Allow to link to your account to CupixWorks.
      4. Choose a BIM 360 Project to link to, then click on Link. Your project is now linked to CupixWorks.
      5. Now click on BIM.
      6. Click on Import from BIM 360.
      7. Select the file and click on Import. (Supported file formats.)
      8. The file will appear in the list on the page. Once the conversion is done, you will see a green Completed message. 
  • Architectural Revit (.RVT)

    • Make sure to include all Sheets from the Architectural Revit model. (Do not purge any Sheets.)
    • Upload BIM instructions:
      1. Click on BIM
      2. Click on Upload BIM.
      3. Choose your .RVT file and click on Open.
      4. Once the conversion is done, you will see a green Completed message. 
  • Full Construction Document Set as PDF

    • Upload instructions:
      1. Click on Reference Plans
      2. Click on Upload Reference Plan.
      3. Click on Upload PDF.
      4. Find and select the PDF on your computer and click Open.
      5. Choose a Display Name and click Upload.
      6. Once completed, the file will show as fully uploaded.  


2. Cupix Support will configure the Project

Cupix Support will configure the Project in CupixWorks. Once the process is complete, they will contact you.


How to revise documents in CupixWorks

After Cupix Support has set up your project, it’s easy to switch BIM 360 accounts or update plans in CupixWorks:

  • Link to a different BIM 360 Project:
    1. Click on Integrations
    2. Click on Change BIM 360 Project.
    3. Select a new project, then click on Link.
  • Revise an imported BIM 360 file:
    1. Click on BIM.
    2. Select the existing BIM 360 file.
    3. Right click in the light blue area showing the file name.
    4. Click on Change Version.
    5. Select the file version needed.
    6. Click on Done.
  • Upload a revised BIM file:
    1. Click on BIM
    2. Select the existing BIM file.
    3. Right click in the light blue area showing the file name.
    4. Click on Reupload.
    5. Choose the revised BIM file.
    6. Click on Open.
  • Upload a revised Reference Plan. (Cupix Support will reconfigure it.)
    1. Click on Reference Plans
    2. Follow instructions above for uploading a PDF.
    3. Optional: Delete the obsolete reference plan.
      1. Select the obsolete reference plan.
      2. Right click in the light blue area showing the file name.
      3. Click on Delete
      4. Click on the Delete button to complete the process. 


M
Matt is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.