CupixWorks Support Center

Connecting to the Insta360 ONE X

Connecting to the Insta360 ONE X

TABLE OF CONTENTS

By registering your camera information with the Cupix Capture App, you can connect the camera to the app immediately for future captures.

This camera is capable of recording up to 1 hour of video at a time with the Cupix Capture App.

Connect to the Capture App

To connect the Insta360 ONE X to the Cupix Capture App:

  1. Turn on the camera.

    • Hold down the power button (small button) for 3 seconds to turn the camera on.
      Note: Make sure the camera battery is fully charged and there is enough storage available for recording the entire day.
  2. Make sure the camera WiFi is on.

    If the camera WiFi is on, the WiFi symbol will light up on the screen.

    If WiFi is not on:

    1. On the camera, quickly press the power button to cycle to ‘Settings’.
    2. Press the large button repeatedly to cycle to WiFi.
    3. Quickly press the power button to select ‘WiFi’.
    4. Switch WiFi to ‘On’ by pressing the large button.
    5. Quickly press the power button to scroll down to and select ‘Done’.
    6. Press the large button to exit the WiFi menu.
  3. Find the camera WiFi SSID and default password.

    If you do not know the camera WiFi SSID and password:

    1. Quickly press the power button to cycle to ‘Settings’.
    2. Press the large button repeatedly to cycle to WiFi.
    3. Quickly press the power button to scroll down to and select 'WiFi Password'.
    4. Press the large button to display the WiFi SSID and password.
  4. Connect the camera to your mobile iOS device.

    1. On your iPhone, iPad or iPod Touch, access Settings > Wi-Fi.
    2. Select the Insta360 ONE X WiFi SSID and enter the password.
    3. Confirm that the camera is connected.
  5. Exit the WiFi Password menu on the camera.

    1. Press the large button to exit the WiFi Password menu.
    2. Quickly press the power button to scroll down to and select ‘Done’.
    3. Press the large button to confirm and exit the WiFi menu.
  6. Add the camera to the Cupix Capture App.

    1. Open the Cupix Capture App and navigate to Cameras.
    2.  Next to Choose a 360° camera, tap on Add.
    3. Once the camera is registered, tap on Done to connect to the camera.


Note: Make sure that you have the latest supported firmware installed on your 360° camera before starting to capture.

Here are instructions on updating firmware for the Insta360 ONE X.

M
Matt is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.