CupixWorks Support Center

Video Capture with Helmet

Video Capture with Helmet

When creating captures in Video Mode with a helmet-mounted 360° camera, your goal is to record your 360° video in a way that generates crisp, clear frames that the CupixWorks algorithm can use to build a digital twin of your capture area.

Best Practices

The video below demonstrates a video capture that uses a 360° camera mounted on a helmet. Notice that our Cupix team member adheres to our recommended best practices, which include:

  • Making sure the camera is mounted at least 6 inches above helmet so the helmet does not dominate the bottom of the video frames
  • Walking at a slow, steady pace to allow the camera to record clear images
  • Pivoting when turning corners to avoid shaking or shifting too quickly, causing blurry frames
  • Slowing down through doorways and corridors to record clear images in areas with blocked line of sight so that the CupixWorks algorithm can use the final frames for photogrammetry
  • Keeping their head and body straight with arms at their side so they do not block the camera lens with their fingers, hands, and arms during the capture
  • Minimizing head movement to prevent blurriness
  • Avoiding hitting the camera on doorways or low ceilings

However, understanding what not to do is just as important as knowing best practices. View our video on Vide Capture Don'ts to learn about common mistakes that can hold you back from creating high quality video captures.

Also, we always strongly recommend that you practice this capture method with the hardware setup you plan to use before going onsite.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.