CupixWorks Support Center

Setting Up and Creating a SiteView

Setting Up and Creating a SiteView

TABLE OF CONTENTS

Administrators can set up a SiteView by choosing which data will be published:

  • Captures
  • Levels
  • Reference plans
  • Annotation Groups
  • BIM files

Once complete, you can create a SiteView.


Publish Captures

There are several ways to publish captures:

  • Publish all using right click in the Capture Table.
  • Publish individual Areas for each Level in the Capture.


Publish All from Capture Table

  1. Click on Captures  in the left side menu.
  2. Find the capture you want to publish and click on its name.
  3. Right click on the capture name, then choose Publish -> Publish All.


Publish Individual Areas per Level

  1.  Click on Captures  in the left side menu.
  2. Find the capture you want to publish and click on its name.
  3. Right click and choose Open
  4. Select the Level that contains the Area you want to publish. 
  5. Right click on the Area and choose the Publish checkbox. 
  6. The toggle under the Publish column should now be blue. 


Publish Levels

To choose which Levels will be available for SiteViews:

  1. Click on Levels  in the left side menu.
  2. Double click on any Level that is listed. This action will open the Level Editor. 
  3. In the information settings, you can toggle Publish on/off as needed. 
  4. Click on the Save  button to confirm your choice.


Publish Reference Plans

To choose which Reference Plans will be available for SiteViews:

  1. Click on Reference Plans  in the left side menu.
  2. Choose the Level that contains the Reference Plans to be published. 
  3. Click on the Info icon  .
  4. Toggle Publish on. 
  5. You should now see Publish changed from grey to blue in the file name and info sections. 


Publish Annotation Groups

  1. Click on Annotation Groups  in the left side menu.
  2. Click on the Annotation Group you want to publish. 
  3. Click on the Info icon  .
  4. Toggle Publish on. 
  5. You should now see Publish changed from grey to blue in the file name and info sections. 


Publish BIM Files

  1. Click on BIM icon  in the left side menu.
  2. Click on the BIM file you want to publish. 
  3. Click on the Info icon  .
  4. Toggle Publish on. 
  5. You should now see Publish changed from grey to blue in the file name and info sections. 


Create the SiteView

After publishing the captures, reference plans, and BIM files, you are ready to create a SiteView. To do so, you will need to select the capture dates and levels you would like to share. Any associated reference plans and BIMs that are published will automatically be viewable in the SiteView.

To create a SiteView:

  1. Click on SiteViews  icon in the left side menu.
  2. Click on New SiteView  button.
  3. Type in the Name of your new SiteView, then click on Next button. 
  4. Select a capture date range or click to toggle on Any Date, then click on Next button. 
  5. Select either individual Levels or toggle on Any Level, then click on Next button. 
  6. Confirm that your SiteView has been set up correctly and then click Save button. 

Your new SiteView will now be listed and accessible from SiteViews in the Project Center.

To share the SiteView and grant public access, refer to Sharing a SiteView from the CupixWorks Web App.

M
Matt is the author of this solution article.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.