Capture High Areas with Helmet
When creating captures in Multi-Shot or Single Shot Mode with a 360° camera mounted on a helmet, you may need to photograph places that are difficult to access, like areas above a shelf. You can still use the camera mounted to the helmet similar to how you would use a monopod. In these situations, your goal is still the same for regular single shot or multi-shot captures - to take 360° photos in a way that generates crisp, clear images.
The video below demonstrates a multi-shot capture that uses a 360° camera mounted on a helmet to capture areas above the metal shelves. Notice that our Cupix team member adheres to our recommended best practices for standing while taking each photo, as well as for selecting where to take photos.
Posture and Physical Awareness
- Make sure to hold the camera at least 6 inches above the shelf so the shelf does not dominate the bottom of the photos
- Point the camera away from your body to help the helmet block you in the photos
- Keep your other arm at your side so you do not block the camera lens with your fingers, hands, and arms during the capture
- Hold the helmet steady and remain still while taking photos so no movement, like breathing, swaying, or shaking, is introduced during the capture to cause blurriness in photos
- Avoiding hitting the camera on shelving, ceilings, and other objects and structures
When using Multi-Shot Mode to take photos in high locations, remember that you still need to take photos with enough shared features between each photo so that the CupixWorks algorithm can use them to align and build a digital twin of your capture area. This is especially true if your photos for a regular multi-shot capture and above any obstructions are taken in the same capture. Note that CupixWorks' photogrammetry algorithm is able to determine the relative locations of each photo along the Z axis, so you can safely take photos at different heights.
- Space photos closer in highly detailed areas so enough features are shared between each photo
Also, we always strongly recommend that you practice this capture method with the hardware setup you plan to use before going onsite.