Connecting to the Insta360 ONE X

By registering your camera information with the Cupix Capture App, you can connect the camera to the app immediately for future captures.

Connect to the Capture App

To connect the Insta360 ONE X to the Cupix Capture App:

  1. Turn on the camera.

    • Hold down the power button (small button) until the camera turns on.
      Note: Make sure the camera battery is charged.
      Battery status and charge percentage are displayed in the upper left of the screen.
  2. Make sure the camera WiFi is on.

    If the camera WiFi is on, the WiFi symbol will light up on the screen.

    If WiFi is not on:

    1. On the camera, quickly press the power button to cycle to ‘Settings’.
    2. Press the large button repeatedly to cycle to WiFi.
    3. Quickly press the power button to select ‘WiFi’.
    4. Switch WiFi to ‘On’ by pressing the large button.
    5. Quickly press the power button to scroll down to and select ‘Done’.
    6. Press the large button to exit the WiFi menu.
  3. Find the camera WiFi SSID and default password.

    If you do not know the camera WiFi SSID and password:

    1. Quickly press the power button to cycle to ‘Settings’.
    2. Press the large button repeatedly to cycle to WiFi.
    3. Quickly press the power button to scroll down to and select 'WiFi Password'.
    4. Press the large button to display the WiFi SSID and password.
  4. Connect the camera to your iPhone or iPad.

    1. On your iPhone or iPad, access Settings > Wi-Fi.
    2. Select the Insta360 ONE X wifi SSID and enter the password.
  5. Exit the WiFi Password menu on the camera.

    1. Press the large button to exit the WiFi Password menu.
    2. Quickly press the power button to scroll down to and select ‘Done’.
    3. Press the large button to confirm and exit the WiFi menu.
  6. Add the camera to the Cupix Capture App.

    • Open the Cupix Capture App and navigate to Settings > 360° Camera > Add to register and connect to the camera.
Note: Make sure that you have the latest firmware installed on your 360° camera before making any captures.
The following link leads to instructions on updating firmware for the Insta360 ONE X.