Connecting to the MADV Madventure 360

By registering your camera information with the Cupix Capture App, you can connect the camera to the app immediately for future captures.

Note: The MADV Madventure 360 camera is also marketed and sold under the alternate name Xiaomi Mi Sphere.

Connect to the Capture App

To connect the MADV Madventure 360 to the Cupix Capture App:

  1. Turn on the camera.

    • Hold down the power button until the camera turns on.
    • Both light indicators for camera and video will flash on initially.
      Note: Make sure the camera battery is charged.
      If the battery level is low, the battery indicator light will turn on.
      When the battery is almost empty, this indicator will turn red.
  2. Turn on the camera WiFi.

    1. Press the Wifi button at the top of the camera.
    2. Make sure the WiFi indicator light flashes on and off as normal.
  3. Find the default camera WiFi SSID.

    • The MADV WiFi SSID begins with 'QJXJ-' followed by six digits, which are the final six values on the right side of the bottom of the camera.
  4. Connect the camera to your iPhone or iPad.

    1. On your iPhone or iPad, access Settings >Wi-Fi.
    2. Select the MADV WiFi SSID and enter the password.
      The default WiFi password is 12345678.
  5. Add the camera to the Cupix Capture App.

    • Open the Cupix Capture App and navigate to Settings > 360° Camera > Add to register and connect to the camera.
Note: Make sure that you have the latest firmware installed on your 360° camera before making any captures.
The following link leads to instructions on updating firmware for the MADV Madventure.