Supported 360° Cameras and Firmware
Cameras and Capture Mode Compatibility
The listed 360° cameras are supported by CupixWorks and offer the following capture mode compatibilities:
| 360° Camera | Supports 360° Photo | Supports 360° Video |
|---|---|---|
| Insta360 ONE R (360 Edition) | ✔️ | ✔️ |
| Insta360 ONE X | ✔️ | ✔️ |
| MADV Madventure 360 / Xiaomi Mi Sphere | ✔️ | ✔️ |
| Ricoh Theta V | ✔️ | ❌ |
| Ricoh Theta Z1 | ✔️* | ✔️ |
*Cupix supports bracketed and handheld HDR mode on the Ricoh Theta Z1.
Supported Camera Firmware
| 360° Camera | Supported Firmware Version(s) |
|---|---|
| Insta360 ONE R | 1.2.17 1.2.18 |
| Insta360 ONE X | 1.18.16 1.18.43 |
| MADV Madventure 360 / Xiaomi Mi Sphere | 1.3.107.115.5.18497 |
| Ricoh Theta V | 3.00.1 3.40.1 3.50.1 |
| Ricoh Theta Z1 | 1.60.1 |
Camera Support Articles
After selecting the camera of your choice, check out our support articles on quickly connecting your camera to the Capture App:
Insta360 Cameras
- Insta360 ONE R 360 Edition - Connecting to the Insta360 One RNote: The Insta360 ONE R is a modular camera with several versions - make sure to use the ONE R 360 Edition, which uses the Dual-Lens 360 Mod and is the only mod able to capture 360° photos.
Insta360 also offers a ONE R Virtual Tour Kit, which bundles the 360 Edition of the camera with selfie stick, tripod, and MicroSD card. - Insta360 ONE X - Connecting to the Insta360 One X
MADV and Mi Sphere Cameras
- MADV Madventure 360/Xiaomi Mi Sphere - Connecting to the MADV Madventure 360/Xiaomi Mi Sphere
Ricoh Theta Cameras
- Ricoh Theta V - Connecting to the Ricoh Theta V
- Ricoh Theta Z1 - Connecting to the Ricoh Theta Z1