Change Reference Plan in SiteView

Digital twins may have multiple reference plans (ie: floor plans, MEP plans, site plans, reflective ceiling plans) available for view with the capture. Switch between reference plans to quickly gain functional and spatial context when viewing captures of your jobsite.

Video: To see this process in action, check out our video on SiteView Navigation Basics.

Changing the Reference Plan

By default, the reference plan is displayed as a mini-map in the bottom left corner. However, there is also an option to fully expand the mini-map as a window docked below or to the right of the capture window(s).

Change from Mini-map

To change the reference plan when it is displayed in the mini-map:

  1. Hover over the mini-map to see that the lower left corner displays the name of the image you are currently using as the reference plan.
  2. Click the image name and select the reference plan you want to use from the drop down list.

Change from Docked Reference Plan

To change the reference plan when it is docked in a window:

  1. At the bottom of the reference plan window, click the image name and select the reference plan you want to use from the drop down list.
Note: If locations in the 3D digital twin are not matching up to locations on the reference plan, contact your team's Cupix admin. Reference plans and digital twins must be scaled using the same origin point and scale factor.